|
Post by bahudu on May 17, 2022 7:34:52 GMT -5
The co pilot reports that "there is Ice forming outside" when there is not. Ant on the acars prgs screen I always see ICE 600LB. I use activesky P3d . I think this problem started after 1.8.3 A update and didn't hange after B update. Best Regards And a recommondation can you describe a hotkey for flight attendat alert. And if there is a way already please tell me.
|
|
|
Post by Travis on May 17, 2022 11:12:58 GMT -5
Hello Behic, I would need to read your FCDU logs for when this mystery ice forms, so I can determine what is happening. If it has happened on more than one flight, then please supply the logs from each flight. If you think of FCDU logs as "black box recorders" for a flight, you can see their importance in figuring out a problem. If you are in flight, the FO is merely reporting that the aircraft is gaining weight... and if the outside temperature is cold enough to support ice forming, your FO assumes the weight gain is in ice. If you are on the ground before a flight, the weather conditions might support ice forming, even if the temperature is above 0C.
------- What sort of FA alert are you thinking about? The "Clear for Takeoff / Landing" alert is mapped to the No Smoking signal in your aircraft. I have a switch on my simple CH yoke set to Toggle No Smoking Sign. (I forget the actual name of the key event, but it's easy to find in the FSUIPC menu system.) Best,
|
|
|
Post by bahudu on May 18, 2022 7:53:43 GMT -5
I think this might be the problem. Because It startted after I gev high values on load maps. Ice cumulation start on the gorun when out temperature is above 25 degree celsius. I keep tryin to correct aircrft charrecteristics and load map. Looking forward to solve the problems anyway enjoying. Thanks for the cabin crew alert solution.
|
|
|
Post by Travis on May 18, 2022 22:45:58 GMT -5
That sounds good; you're the Captain!
I could still happily review your latest FCDU log that shows you affected by mystery ice.
Best,
|
|
|
Post by bahudu on May 21, 2022 1:19:48 GMT -5
The ICING problem persist
|
|
|
Post by Travis on May 21, 2022 12:59:30 GMT -5
Hello Behic, Starting at 30 seconds after takeoff, we measure the current total weight of the aircraft and compare that with the A/C's Empty Weight, plus the Payload, plus the current Fuel weight. Your measurements are different throughout your flight, ranging from 600lb to 601lb. I see that you have defined an A/C Empty Weight in your Overrides Configuration file of 90710 (lb). Consider changing that to 90110, and if that does not improve things, to then change it to -1. We would then read the Empty Weight from the simulator directly. I may be able to do something in code for Beta 2. Best,
|
|
|
Post by bahudu on May 23, 2022 8:57:50 GMT -5
I cahnged empty weight to -1 the proplen is solved. Thanks
|
|