|
Post by andqui on May 26, 2015 16:45:34 GMT -5
The interface for the CS 727 picks up the cabin altitude, but the gauge in the CS cockpit is broken and you can't really set the desired altitude. Is there a way to get the interface to ignore the cabin alt variable and behave as if it were not simulated?
|
|
|
Post by Travis on May 26, 2015 16:58:35 GMT -5
Have you tried the CS727Fix.xml gauge in the \Gauges\FCOMPNL\ folder? I keep thinking that I should migrate its techniques into the actual interface... one day I'll do that.
|
|
|
Post by andqui on May 26, 2015 21:01:15 GMT -5
What's the line I need in the vc section of the panel.cfg?
gauge52 = FSCaptain!CS727Fix,1,1,1,1?
|
|
|
Post by Travis on May 26, 2015 22:24:37 GMT -5
Close, it's:
gauge52=FCOMPNL!CS727Fix,1,1,1,1
|
|
|
Post by andqui on May 31, 2015 10:33:24 GMT -5
That xml fix didn't work, the cabin altitude is still pegged to 9000+ on the ground and I can't set the desired height. Is there a way to just turn the pressurization off in the interface for this particular aircraft?
|
|
|
Post by Travis on May 31, 2015 19:07:14 GMT -5
I'll have to defer this to Dutch, who is the 727 master around here.
It would not be possible to turn off only the pressurization on this aircraft, but since we've had some similar requests of late I'll make a task to do so during the current Beta phase.
|
|
|
Post by andqui on May 31, 2015 22:36:24 GMT -5
Thanks. It's just this one particular aircraft, where the pressurization system is broken and you need some 3rd party mods/gauges to fix it. Much simpler just to have the interface treat it as INOP or automatic without everyone having to apply a fix.
|
|
|
Post by Travis on Jun 1, 2015 23:01:44 GMT -5
This issue has been added to the current story board - it's behind the current set of "bugs," but it's leading new "features" so I hope to get it worked in by Beta 3 at best.
|
|