|
Post by i8aaq on Sept 10, 2014 8:37:51 GMT -5
Hi, I apolige for my english....
I need to change the value (60 PPH) that appears in automatic in the fuel system area of Aircraft Characteristics of FSCaptain Administrator and precisely in line "Fuel Flow CRZ" from "60" to "42" (it is a little airplane), but when i press "apply" a message appears that I can only change with values from 60 to 9999. how can I do to get the correct fuel consumption (42 and not 60 PPH)?
thanks
|
|
|
Post by Travis on Sept 11, 2014 1:48:40 GMT -5
Eye Ate, Currently 60PPH seems to be the minimum for all aircraft. I will encourage Dutch to lower the "minimum" for this (and for other items as well) for smaller aircraft as soon as possible.
|
|
|
Post by i8aaq on Sept 11, 2014 4:44:24 GMT -5
Thank you Travis, obviously also the minimum of CLB (default CRZ x 2) and DES (default CRZ / 2)
|
|
|
Post by Travis on Sept 11, 2014 14:53:18 GMT -5
Duly noted Alfredo!
|
|
|
Post by i8aaq on Dec 16, 2014 10:41:10 GMT -5
Hi Travis,
some news for this problem?
have it changed in the new release 1.6.0?
|
|
|
Post by Travis on Dec 16, 2014 12:16:06 GMT -5
Hi Alfredo,
No change for 1.6.0 - it turned out to be a broad enough subject that I wanted to isolate it. Now that the "military = no charter" issue has resurfaced, I need to decide which one to go for first.
And literally that quickly I see that it's going to be this one - I have a workaround for the military / charter issue which I was post in that topic.
|
|
|
Post by i8aaq on Dec 17, 2014 10:45:19 GMT -5
ok...thank you!
|
|