|
Post by rhay on Sept 7, 2010 10:12:00 GMT -5
Hi, how do I add airbus x aircraft to the installer? When i run the FSCaptain installer it does not find the aircraft please help as love using FSCaptain thanks
|
|
|
Post by 0artur0 on Sept 7, 2010 15:56:21 GMT -5
Yes, it doesn't show up.. probably because it's VC only. I used the method described in the manual and manually added FCOM to panel.cfg. Did two flights already, works perfectly.
|
|
|
Post by kuebelkiller on Sept 7, 2010 15:59:13 GMT -5
Hello Ray Had a similar Problem. I added the lines manually. Just take the panel.cfg of a acft that is already with the fcom, and copy and past the fcom lines to the airbusX panel.cfg . Don´t forget to re- number the entries. In my case the fcom window had number 002, and the fcom gauge had to be renumbered with 43. But I only did this with the A321 CFM. Don´t know if it´s similar to the others. Just like this: [Window Titles] Window00=Main Panel Window01=FCOM [Window00] file=Panel_2D.bmp size_mm=800, 600 BACKGROUND_COLOR=0,0,0 visible=0 ident=MAIN_PANEL // This is the FCOM window - Auto-installed by FSCaptain [Window01] size_mm=380,320 position=8 visible=0 ident=24477 gauge00=FCOM!ACARS,1,1,380,320 // End of the FCOM window Add this after gauge entry 42! gauge43=FCOM!FDR,1,1,1,1 That should work. Good luck Chris
|
|
|
Post by rhazy on Sept 7, 2010 16:07:27 GMT -5
;D Hi many thanks for the help works great !! Mhazy
|
|