|
|
Post by Sanal on Aug 19, 2010 18:50:09 GMT -5
Dutch,
Captain Sim developed the B707-300. I already downloaded and installed, I checked FCOM installer and found Boeing-320B ADV in (CSB707-300). Without any problem I installed, FCOM appeared and click power, BUT FCOM cannot fly this plane , because there are no Cfg, files available.
Can you please advise.
Thanks
Sanal
|
|
|
|
Post by Dutch Owen on Aug 20, 2010 13:24:43 GMT -5
It should have created a .cfg file for you, which you probably need to modify to get absolutely accurate. Did it say it created a configuration file for you? Or just that one doesn't exist?
Dutch
|
|
|
|
Post by Sanal on Aug 20, 2010 20:18:12 GMT -5
Dutch, Here is the FCOM screen shot in Cs-707-300  [/URL][/img] |
|
|
|
Post by tvieno on Aug 22, 2010 16:46:22 GMT -5
You need to add "atc_model=" to you aircraft.cfg. It's real easy.
Assuming you have FSX, go to your \Program Files\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes directory (for FS9 go to \Program Files\Microsoft Games\Flight Simulator 9\Aircraft)
Find the directory in which the aircraft in question is. It probably is B707 or something like that. Open the file aircraft.cfg with Notepad.exe
Hit Ctrl+F and put [General] in the search box. Scroll down a few lines and you should see something like:
[General]
performance=Boeing 727-200 with JT8D-7B engines @ 14,500LB
atc_type=BOEING
atc_model=B722
editable=0
Category=airplane
Except you won't see "atc_model=". All you need to do is put in "atc_model=B707" or if you want to be specific "atc_model=B703" (because the plane is a 707-300). If you don't have "atc_type=" either you can put that in too "atc_type=BOEING". (all of course without the quotes).
Save and exit it. Re-load up the plane and go from there. Good luck.
|
|
|
|
Post by Sanal on Aug 22, 2010 20:36:44 GMT -5
Tvieno, Thanks for your help. You solved the problem, but now I am stuck at payload loading. Requested: 69500 Current:43665 Needed 25835 What ever I tried always "Needed" stop loading at that figure. I tried different loading but Needed stop loading after certain figures. What do you think is the problem? Thanks again Sanal Here is the screenshot: ![]() ![]() ] |
|
|
|
Post by Sanal on Aug 22, 2010 20:41:31 GMT -5
|
|
|
|
Post by tvieno on Aug 22, 2010 21:56:25 GMT -5
You need to put a /img , in brackets []at the end of the line for the image to display. About your problem, that is beyond me. You'll have to wait for Dutch. |
|
|
|
Post by Sanal on Aug 22, 2010 23:51:57 GMT -5
Tveino, Thanks Sanal I think this OK now.  |
|
|
|
Post by Sanal on Aug 24, 2010 1:14:50 GMT -5
OK..I solved the problem.Case closed Sanal  |
|
