|
Post by kelvyn on Jul 27, 2010 16:56:58 GMT -5
Dutch,
I started using FSCaptain on the CaptainSim's 757. When I got the FSCOM powered on and a flight destination selected via F4, I'm unable to get the Payload to complete. Fuel and PAX get boarded and READY but the payload progresses either very slowly or it just stops leaving me on a stated in which I can't really use FSCaptain. Manual load doesn't help either. Please help!!!
Checking the CFG file to see if there's a setting that could be causing this after it was automatically generated.
If anybody else using the same aircraft is not having an issue then it will be nice to know so at least there's some hope it can be fixed rather quickly.
Thanks
|
|
|
Post by kelvyn on Jul 30, 2010 7:12:22 GMT -5
Well this has been a little wild experience... the PayLoad would start loading and then stop after XXXX loads have been injected into the aircraft. So, created a Load Map and set the limit of 7 stations to match those weights found on the ACE PreFlight weight tab and at least it fully loads now.
|
|
|
Post by kelvyn on Jul 30, 2010 19:41:48 GMT -5
Dutch,
Getting a weird behavior out of the Load Maps... for one the "Optional Overrides" once I set the seat, crew, and jumseats info it applied to all the other load maps once I saved it. Also, every 5th and 15th station is showing 0 for limit even though I set a limit on it.
Why is this happening?
|
|
|
Post by Dutch Owen on Jul 31, 2010 8:05:19 GMT -5
There's some problems iwth how the admin is saving the text maps, should be fixed in 1.1.4 which I'm starting to test now. I may send you an advance copy to see if that solves the problem. Except maybe Monday.
Dutch
|
|
|
Post by kelvyn on Jul 31, 2010 9:59:54 GMT -5
All right... sounds good.
|
|
|
Post by kelvyn on Aug 4, 2010 16:31:10 GMT -5
Dutch,
Found a weird behavior here... I have a committed flight which shows as Open in the dispatch. For this airplane I've been testing the Load Maps and it randomly woks, so I selected to Supress Auto-Load and Simulate Load. I then manage my weights through the third party loader and so far so good. When I then go into FSCaptain it changes my payload and PAX count. That I know of this is not supposed to be happening unless I either delete the open flight or have it revise it.
As you can see is making FSC and the CS757 experience quite a painful one. Hope you and/or anybody else have some ideas.
Thanks
|
|
|
Post by Dutch Owen on Aug 11, 2010 13:45:50 GMT -5
I believe that's fixed with 1.00.04 -- the older versions relentlessly recomputed payload and fuel even when they had been changed before the flight started.
Dutch
|
|