|
Post by copterdr on Apr 27, 2010 20:31:05 GMT -5
the fcom shows the feel there 737-300,400,and 500 on the data base screen.I have several liveries in each model.Have only been able to get a single livery to work in the 737-400 series.None at all in the others.I put the atc_ type=B734 and atc_model=B734 in general,then atc_model=B734 in the sim flt 1. Tried doing the same with the other models ie b733 and b735 but the fcom wont show up when I load the acft in the sim. Im using fsx on a vista machine.What am I doing improperly? Keep in mind that Im an old guy who's idea of computing was pulling off a sock and counting toes! Like your program by the way. Will register as soon as I can get the thing workin properly. Dont want to be stuck just takin off from three airports .
|
|
|
Post by Dutch Owen on Apr 30, 2010 17:37:23 GMT -5
My question is, when you say it doesn't show up, do you mean that you get a big black square instead of the FCOM? Or, when you toggle it using ctrl-shift-6 nothing happens?
Perhaps the installer didn't install it properly. The answer to the above question will help narrow down the problem.
If you could send a panel.cfg file from one of the airplanes that it doesn't work with, that would help me to analyze what's wrong.
Thanks! Dutch
|
|