|
Post by asanal on Dec 30, 2009 12:47:23 GMT -5
1- Is there any option to export FSX Fuel/Payload to FCOM?
I am utilizing TOPCAT for Takeoff and Landing performance calculation. TOPCAT imports data to FSX Fuel/Payload . Thanks Sanal
|
|
|
Post by Dutch Owen on Dec 30, 2009 14:37:22 GMT -5
I'm not completely sure what you mean, but I think what you're asking for is in the new options to suppress auto-load of payload and fuel (on the options for all airlines if you want to apply it to all, and on the Load Maps if you want to apply it to a particular airplane). If you turn these options on the FCOM accepts whatever is in the airplane when you start the flight as the fuel and payload.
Hope this helps, Dutch
|
|
jet1
Trainee
Posts: 26
|
Post by jet1 on Dec 30, 2009 17:17:43 GMT -5
It will probably be easier to use Topcat once the update that brings flight selection from the Administrator is available. That way you'll have the payload and fuel numbers available and punch them into topcat even before you fire up the sim.
|
|
|
Post by asanal on Dec 31, 2009 1:51:15 GMT -5
Dutch and Jet1,
"the new options to suppress auto-load of payload and fuel (on the options for all airlines if you want to apply it to all, and on the Load Maps if you want to apply it to a particular airplane). If you turn these options on the FCOM accepts whatever is in the airplane when you start the flight as the fuel and payload."
That will be perfect. Topcat is developing communication with CS-767X and I assume it will be ready around next two weeks.
If I understand correctly, Topcat will communicate with FSC CS-767X "Administrator Flight Selection"file and will provide fuel/payload data.
Thanks,
Sanal
|
|