|
|
Post by Dutch Owen on Sept 17, 2009 19:49:40 GMT -5
Hey brave pioneers,
I've done a bit of re-design on the website, and put a Fixpack download link on the downloads section. This will fix up most of the issues found so far. I'll update the fixpack as fixes become available. It'll be cumulative so you can download it anytime and apply it. It's a zip file with a readme to explain how to use it.
Thanks, all
Dutch
|
|
|
|
Post by Lane on Sept 17, 2009 21:51:52 GMT -5
Have the Fscaptain beta installed and installed fixpack for beta 07.05 Ready to install the FCOM gauge  No sure which A/C to install? and were to install it? Never mind Just saw the Acme Douglas DC-3C for fs9 link is back up going to start with Acme DC-3C Lane  |
|
|
|
Post by Dutch Owen on Sept 17, 2009 22:21:23 GMT -5
Sorry it's probably back down again -- I'm struggling to get all the components in there. Best wait for a few hours at least.
It's good to start with the Acme planes -- the components are pre-configured. Just press Shift-8 to bring up the FCOM.
Dutch
|
|
|
|
Post by Lane on Sept 17, 2009 23:19:20 GMT -5
Thanks Dutch, Installed the ACME DC-3C Moved A/C to KIND dock 8-ramp Cargo.
Found the FCOM on the mini panel and open with mouse click. Ready for flight testing.
the 7 landings and etc. Need to go in A/C Cfg file and adjust brakes to 0.5 I had a nose over
during taxie. All signed up with Acme air.
That sure is a neat gauge.
Lane
|
|
|
|
Post by Dutch Owen on Sept 17, 2009 23:38:06 GMT -5
Here's tip for ya, Lane. You can skip the check ride by doing a ferry flight! Acme won't allow revenue flights without a check ride, but they will allow ferries. Once you've done a ferry successfully, they'll consider you authorized in the DC-3C! Typical airline bureaucracy... Dutch |
|
|
|
Post by Lane on Sept 18, 2009 2:41:14 GMT -5
Thanks for the tip Dutch. I made a Ferry flight from Indy to Louisville my first flight for Acme
in your Acme DC-3C. had a CTD at end of flight. made a report as best I could rember
Lane
|
|
No sure which A/C to install?