|
Post by Travis on Oct 29, 2014 23:45:30 GMT -5
Giants Win! My wife may allow me to be back on our Sunday.
|
|
|
Post by Lucas on Oct 30, 2014 3:06:02 GMT -5
Peter, let me allow to paste some screenshots (I hope that is what you expect in your previous post) These are in OFFLINE mode: Next: a) after press LOGIN b) after press PROCEED c) after press EXEC NODETAILLOAD value I can check later... EDIT: I did not do one thing! I have to check how many pax is in load maps, in particular stations (I suppose that 234), and there should be - probably - 301
|
|
|
Post by Travis on Oct 30, 2014 13:34:48 GMT -5
Lucas,
I feel you're correct - if you have 234 stations defined, that's the max you'll have loaded.
I've emailed you an experimental load map. Feel free to play with the numbers - you have more PAX weight, and to balance everything out I've removed (proportionally) from the cargo areas.
|
|
|
Post by Travis on Nov 1, 2014 11:34:18 GMT -5
A new Captain has brought our attention to an issue with the ACARS Installer.
The Aerosoft Airbus Extended series - in an effort to be very friendly to other developers - has left their panel.cfg Window03 to Window10 unused by their own extra panels.
The ACARS Installer asks for "the Window you'd like your ACARS gauge to be placed AFTER" and if there is no window present... the gauge will not be installed... although the FDR will be installed.
If you can look over my lame graphic "skills," this image should better demonstrate the point:
Either Dutch or I will endeavor to correct this in time for Beta 4. If we miss that timeframe, we may post a standalone download in the File Sharing Area until a new Fixpack is launched.
|
|
|
Post by captwotan on Nov 2, 2014 15:27:35 GMT -5
Trav/Dutch,
I have another problem, but this time nothing to do with the MJQ400 (at least i don't think it is). When doing a search for available flights within the Administrator the function never completes. It continuously says "Searching", you can click on "Cancel" and it appears to be fine after that. Second issue, not sure if this is a one off, but while using the FCDU went through the process of starting a flight, it hung at "Transmitting Updated Manifest", it wouldn't go any further and appeared to have locked up, the window was physically fine, but the functions were all dead, leaving me with nothing to do but restarting the program. Probably with this is that the FDCU wouldn't let me load without the door being open and the engines stopped.
|
|
|
Post by air59 on Nov 2, 2014 17:50:45 GMT -5
Hi,
I have the same issue (v 1.5.0 and v1.5.1 rc3), but only with FCDU Inside P3D. The standalone FCDU is working (i launch p3d and FSCAPTAIN with admin rights).
In my case, the Inside administrator doesn't work. It asks me if FSCAPTAIN is already installed...
Don't know how to deal with...
Thierry
|
|
|
Post by Travis on Nov 3, 2014 0:51:46 GMT -5
Ian, I will be offline for a majority of this upcoming week, but if you would ZIP and email your \logs\ to us, we will review them. I'm not certain what "Transmitting Updated Manifest" is, but if it is related to this PAX Loading issue then we may need more details. The "Searching" issue you describe is new and unfamiliar. Please email us with more details... the aircraft or airports/flights involved....
|
|
|
Post by Travis on Nov 3, 2014 0:57:39 GMT -5
Thierry,
Which FCDU issue and Admin issue are you reporting to??
The Administrator via the Add-on menu is not a good choice. If you need to run the Administrator, you should do so outside of the simulator -- no matter if you are trying to configure an Aircraft, an Airline, or to create a flight....
|
|
|
Post by air59 on Nov 3, 2014 3:30:36 GMT -5
Hi Travis,
I have problems with my map load and after 3 evenings trying to fix it i'm near to give up.
During my tests, i noticed that i'm not able to use the Admin from P3D (warning message asking if FSC is already installed) and when i use ACARS from P3D, it stops at the "Transmitting Updated Manifest" message just after i start the boarding. Those problems don't occur whan i use stand alone Admin nor FCDU.
May be if i can solve this issue, it will solve the load map problem (i don't see what else to do...).
That's why i am refering to capwotan's issue wich seems to be the same...(but may be would it be better to open a new thread about this...)
Thierry.
|
|
|
Post by Travis on Nov 3, 2014 9:35:42 GMT -5
Hi Thierry, First, what is your load map problem? Those are usually easy to sort out, once you've had experience. So let's give you some. About the "Manifest Update Transmitted" message (I assume that's the one you seeing... I can't find one that begins with "Transmitting....), this message is the one that's generated when loading has completed and when the manifest has had to change. Having it lock up at that point is not a good thing. Since this may be due to a load map issue, I'm curious if they're related. Please ZIP and email your \FSCaptain\Aircraft\Maps\ folder, your \FSCaptain\Data\Logs\ folder, and your \FSCaptainData\Manifests\ folder to Dutch and myself and we will investigate. Ian, the same from you as well please. My responses will be tardy this week....
|
|
|
Post by captwotan on Nov 4, 2014 15:56:10 GMT -5
Sent you the logs Trav'. Along with the errors i experienced.
|
|
|
Post by bradimarte on Nov 5, 2014 1:31:18 GMT -5
Hi,
I want to notify you that only with 1.5.1 release the fscaptain not recognize more the map load of the ifly 737 family (before was all ok with the 1.5.0)
I use FSX and FCDU in a client pc.
Rudy
|
|
|
Post by Travis on Nov 5, 2014 2:14:21 GMT -5
Hi Rudy,
Please archive all of the files in your \FSCaptain\Data\Logs\ folder (use ZIP, 7Z, RAR, or most any format) and email that to us using the directions you can find in my .sig file.
Dutch and I will review them and try to make sense of what is (or is not) happening.
Regards,
|
|
|
Post by captwotan on Nov 5, 2014 14:55:17 GMT -5
Hi Trav'
Another day, another Gear Overspeed Penalty, this time with the penalty disabled. Do you need the log or have you got enough?
Please (when you have resolved this) can we have these penalties wiped out?
|
|
|
Post by Travis on Nov 6, 2014 11:08:49 GMT -5
Rudy,
Did my suggestion help at all??
|
|