|
|
Post by andrey on Aug 18, 2020 23:48:06 GMT -5
(NO LOAD PLAN: NO LOADMAP FOUND) HOW TO SOLVE THE PROBLEM  |
|
|
|
Post by peter on Aug 19, 2020 4:16:35 GMT -5
Hello Andrey, that would happen when you use a plane that has not been properly set up for FSCaptain yet. FSCaptain would still work with the airplane, but certain features, like precisely loading the airplane, would be inoperable. We can fix this for you. Can you send us (see blue link below) a zip file with your FSCaptain\Data\Log folder, your FSCaptain\Aircraft folder, and the aircraft.cfg file of your airplane model (located in Simobjects/Airplanes/<Aircraft Folder>)? Please send the email to all of us and copy the address of this thread into your message so that everyone on the FSCaptain team knows what the logs are for. Cheers, Peter |
|
|
|
Post by Travis on Aug 19, 2020 18:01:08 GMT -5
Hello Andrey,
Adding to Peter's good suggestions... that message you see does not mean there is a problem.
It's just to let you know there is no Load Plan for your flight because there is no Loadmap.
You don't need a Load Plan (which simply is a list of what each Load Station of your aircraft has) if you don't want one.
Without a Loadmap, if you use FSCaptain to Auto Load your aircraft, it will try to put an equal amount of Payload in each Load Station. It will also try to place an equal amount of Fuel in each eligible Fuel Tank. (It won't overfill tanks, so if you have a single Center tank and two Wing Tips, you'll get full Wing Tip tanks and the remainder would go into the Center tank. Etc.)
Some Captains don't care to have their loads strictly controlled, so there is no requirement to have a Loadmap.
However... the three of us try to make Loadmaps for our own use. It's not a difficult process, and the FSCaptain User Guide has a section devoted to making your own.
If you can't make a Loadmap on your own, if you share your aircraft(s) data with us, we might be able to help you find data to make your own Loadmaps.
Best regards,
|
|
|
|
Post by andrey on Aug 20, 2020 3:48:21 GMT -5
|
|
|
|
Post by peter on Aug 20, 2020 16:44:49 GMT -5
Hi Andrey, below you may find a modified configuration for the Tupolev 134A. - Place this file into folder FSCaptain\Aircraft\Overrides\ : tu134.cfg (1.46 KB) - Place this file into FSCaptain\Aircraft\Maps\ and rename it to tu134.cfg: tu134.cfg.maps (1.01 KB) That will hopefully resolve your issues (let us know). If the problems persist and this airplane is freeware, I could test it if you point me to it. Your exit mapping looks problematic, but without the actual model I cannot make any meaningful changes. I have also adjusted some of your numbers. The biggest change is that I removed all jump seats and raised the number of pax seats to 76. This is in line with the aircraft.cfg file of your TU 134. Generally, jump seats are only used on cargo airplanes, which often have a few seats to take a fellow pilot along. They are not useful for a passenger airplane, and your model seems to be in pax configuration. The numbers and station of load maps in the FSCaptain map file needs to be roughly in line with the stations in aircraft.cfg to be useful. About the average wind: FSCaptain gives you the wind forecast along each leg of your flight in the dispatch release. Based on this, you could estimate the average wind. I think some weather engines also give you the average wind. Best regards, Peter |
|
|
|
Post by andrey on Sept 4, 2020 14:57:22 GMT -5
|
|
|
|
Post by peter on Sept 4, 2020 17:17:25 GMT -5
Hello Andrey,
let's not open a second front with the PMDG airplane and focus in the Tupolev instead. We need your help to fix this. Can you send us (see blue link below) a zip file with your recent FSCaptain\Data\Log folder based on the new configuration files? Please send the email to all of us and copy the address of this thread into your message so that everyone on the FSCaptain team knows what the logs are for.
Also, if you could point us to the Tupolev model, we can check things out on our own PCs.
Best,
Peter
|
|
|
|
Post by andrey on Sept 7, 2020 12:54:19 GMT -5
the plane is paid let me send it to you in person
|
|
|
|
Post by Travis on Sept 8, 2020 17:58:28 GMT -5
Hello Andrey,
We need more information other than "it didn't help."
Could you please be more specific?
If this is a payware aircraft, could you let us know the name of the developer / publisher? We could look at what they have published.
With best regards,
|
|
|
|
Post by andrey on Sept 8, 2020 23:54:48 GMT -5
|
|
