|
Post by dfloth on May 18, 2020 8:46:40 GMT -5
Greetings,
I'm having a devil of a time getting FS Captain recognize & call out Vspeeds with P3D V5.
I've done all I know to do and now waving a white flag cause I give up & calling out for help from y'all.
Symptom is... FCDU does not show VSpeed data at roll out and yes flaps are deployed.
Attached are my logs (FCDU and FSCaptian)
And the B752.cfg I think the FCDU is loading from C:\P3D V5\FSCaptain\Aircraft.
Not sure if it's a P3D v5 bug or maybe something I'm doing wrong.. What do you see?
Thanks in advance, D-Man Seattle Wa.
|
|
|
Post by Travis on May 18, 2020 18:32:24 GMT -5
D-Man,
It's not P3D5... I'm lately seeing this too with P3D4 aircraft (sans HF3 or whatever the latest thing is called) which I know should have the data available.
So it's at-or-near Job One on my current list. It's one of the two holdups for Release Candidate 1....
Best,
|
|
|
Post by dfloth on May 19, 2020 6:55:55 GMT -5
Thanks for the information and thanks for all you do for us!
Cheers, D-Man
|
|
|
Post by philtum on May 20, 2020 10:09:11 GMT -5
Hi D-Man, Every time that I do not get the Vspeed call-outs it's because my Speedcall=1 table is missing from the aircraft config. file. I see that they are also missing from your file. If you add a Speedcall=1 section to your file, in my experience, your FO will give you the call-outs. Regards, Phil. Travis, While I am on the subject, FSC is not reading my Speedcall file correctly. It seems that my flap setting is recognized but the aircraft weight is not, so that I get the figures from the first line of the Speedcall=5 section instead of the line relating to the aircrafts current weight. It is only my vast experience and piloting skills that are averting disaster on every flight. Using FS9 on W7. Regards, Phil.
|
|
|
Post by Travis on May 20, 2020 18:16:50 GMT -5
Hi Phil! My last Beta suffers from a Really Dumb ThingSM that I did in code; the results from that are a few of the Aircraft Config values (including SPEEDCALL) are not being read!!! That's been fixed for RC1 - which I hope to post this weekend - but I've also found some 'areas of SPEEDCALL improvement' which I will hold off for RC2 / Release which I hope will be posted by June 1st. ----- As for other things... I hope that everyone knows the "flap setting" value on a SPEEDCALL line is the value shown in the FCDU | SYSTEMS display, and not what is displayed in the cockpit. What you or I might see as an aircraft's flap setting may not be the same value as the simulator knows. Here's a post I made a few years ago which hopefully describes this difference.Best,
|
|
|
Post by philtum on May 21, 2020 9:16:07 GMT -5
Thanks Travis,
No worries, we are all human. I will look forward to the update.
Best Regards, Phil.
|
|
|
Post by Travis on May 25, 2020 1:00:31 GMT -5
Hi Phil,
Release of RC1 should happen later this week - before the weekend!
Best regards,
|
|
|
Post by Travis on May 27, 2020 11:04:24 GMT -5
RC just posted. I hope the callouts work better for everyone than they did in the past month or three.
Best,
|
|