|
Post by losik on Aug 18, 2014 13:30:30 GMT -5
Hello,
I use the Airbus Extended V1,16 and FSCaptain generates one still the same failure. There is a fault of hydraulics and then turns off the right engine that can not be started. Another fault I never had. Now I have set 0% of mechanical failures, but this situation occurred again today. It happens during climb around 15,000 feet. Do you know where the problem could be?
Thx
Milan
|
|
|
Post by captwotan on Aug 18, 2014 15:16:05 GMT -5
It could be icing. For some reason FSCaptain always shuts down the right engine in icing conditions, it seems awfully quick to kill it off. Unless you have Anti-Icing set as INOP FSCaptain will believe that you can control the anti-ice even if it can't see the aircraft anti-ice is active.
Try either disabling the icing effect; or marking the Anti-ice as INOP within the Aircraft settings.
|
|
|
Post by losik on Aug 18, 2014 16:53:34 GMT -5
Ok I'll try to mark INOP Anti-Ice in Aircraft settings and see if will be any change. Thank you
|
|
|
Post by Travis on Aug 20, 2014 11:17:38 GMT -5
Milan,
If you would, please email me some FCDU log files from these flight and we will look to see if we can find what's actually failing, and why.
Regards,
|
|